EMPR

DMP series

Multi-Protection : against overcurrent, undercurrent, Stall, Lock, phase unbalance, phase reversed Asymmetry, Ground fault, Short circuit Real time processing and high precision by using Micro Controller Unit Display the causes of the fault and the values Prompt A/S by looking the LED panel which displays the causes of the type of fault and values 3 phase digital ampere meter function (Digital meter) Motor load rate(%) and Easy to check the motor load Condition Selectable either the inverse time or definite time characteristics Standard : IEC60947-1, IEC60947-4-1, IEC60947-5-1, UL508, KSC4504 Certification & approval : CE, UL, cUL, Lloyd register, Korea register, KS, ISO 14001, ISO 9001(Including proceedings)

  • Electronic protection type up to 60A with Micro controller unit & Digital display part

    General digital type motor protection relays using MCU(Micro Controller Unit)
    • Real time processing and high precision

    Both screw type and tunnel type wrings are available in a DMP-E Type D-EMPR
    • Simply detach the screw terminal, you can use it by the tunnel type relay
    General digital type motor protection relays using MCU(Micro Controller Unit)
    • Real time processing and high precision
    Multiple protection
    Multiple protection
    Protection DMP-S/Sa DMP-SZ/SZa DMP-SI DMP-T/Ta DMP-TZ/TZa DMP-TI
    Wiring Screw type Tunnel type
    Over current
    Under current
    Stall
    Lock
    Phase failure
    Revers phase
    Asymmetry
    Ground fault · · · ·
    Short circuit · · · ·
    Install the Unit/Extension type in one body
    • The display part may be separated from the body You can check the values and the causes of the fault without opening the distribution ● panel door
    Standard:
    • IEC60947-1, IEC60947-4-1, IEC60947-5-1, UL508, KSC4504
    Certification & approval:
    • CE, UL, cUL, Lloyd register, Korea register, KS, ISO 14001, ISO 9001(Including proceedings)
    Display the causes of the fault and the values
    • Prompt A/S by looking the LED panel which displays the causes of the fault and the values
    3phase digital ampere-meter function (Digital ampere-meter)
    • Additional ampere-meter is not needed

    Motor load rate(%)
    • Easy to check the motor load condition
    Selectable either the inverse time or definite time characteristics

    Applicable to inverter control circuit
    • LS DMPR has high performance under the harmonic noise and can be used in the Inverter control circuit (20~200Hz)
    Elegant design
    • High class product image by the elegant design
Protect function
Protect function
Over current Depend on setting time Selectable the inverse/definite
Phase loss Within 3seconds Over 70% of the rate of unbalance
Phase unbalance Within 5seconds Over 50% of the rate of unbalance
Phase reverse Within 0.1seconds Function enable
Stall Within 5seconds Over 180% of the setting current
Lock Within 0.5seconds Setting 200~900% of rated current
Under current Within 3seconds Setting 30~70% of rated current
Ground fault Note) Selectable 0.05~1.0seconds Grounded current setting by dip s/w (100~2500mA)

Note) Lock protection is operated after setting D-time in case of definite time type

Function selection
Function selection
FUNC Sel Description
1. CHA Inv/dEF Operating characteristics setting(Inverse/definite time type)
2. dEF 0~30(S) Setting the operating time(In definite type)
3. r.P oFF/on Phase reverse enable
4. Und oFF/30~70(%) Under current enable and setting
5. g-F oFF/0.05~1.0(S) Ground fault enable and setting
6. Stl oFF/on Stall enable
7. Loc oFF/200~900(%) Lock enable and setting
8. Ct 1~120 CT ratio setting
9. P.F on/oFF Phase fault enable
A. gFd oFF/on Setting delay of ground fault
b. StA 0~120 Operating time setting by month
c. StH 10~730 Operating time setting by hour
d. tAH A000,000.0 Displaying total operating time
+ Product

EMPR

DMP series

Multi-Protection : against overcurrent, undercurrent, Stall, Lock, phase unbalance, phase reversed Asymmetry, Ground fault, Short circuit Real time processing and high precision by using Micro Controller Unit Display the causes of the fault and the values Prompt A/S by looking the LED panel which displays the causes of the type of fault and values 3 phase digital ampere meter function (Digital meter) Motor load rate(%) and Easy to check the motor load Condition Selectable either the inverse time or definite time characteristics Standard : IEC60947-1, IEC60947-4-1, IEC60947-5-1, UL508, KSC4504 Certification & approval : CE, UL, cUL, Lloyd register, Korea register, KS, ISO 14001, ISO 9001(Including proceedings)

+ Features
  • Electronic protection type up to 60A with Micro controller unit & Digital display part

    General digital type motor protection relays using MCU(Micro Controller Unit)
    • Real time processing and high precision

    Both screw type and tunnel type wrings are available in a DMP-E Type D-EMPR
    • Simply detach the screw terminal, you can use it by the tunnel type relay
    General digital type motor protection relays using MCU(Micro Controller Unit)
    • Real time processing and high precision
    Multiple protection
    Multiple protection
    Protection DMP-S/Sa DMP-SZ/SZa DMP-SI DMP-T/Ta DMP-TZ/TZa DMP-TI
    Wiring Screw type Tunnel type
    Over current
    Under current
    Stall
    Lock
    Phase failure
    Revers phase
    Asymmetry
    Ground fault · · · ·
    Short circuit · · · ·
    Install the Unit/Extension type in one body
    • The display part may be separated from the body You can check the values and the causes of the fault without opening the distribution ● panel door
    Standard:
    • IEC60947-1, IEC60947-4-1, IEC60947-5-1, UL508, KSC4504
    Certification & approval:
    • CE, UL, cUL, Lloyd register, Korea register, KS, ISO 14001, ISO 9001(Including proceedings)
    Display the causes of the fault and the values
    • Prompt A/S by looking the LED panel which displays the causes of the fault and the values
    3phase digital ampere-meter function (Digital ampere-meter)
    • Additional ampere-meter is not needed

    Motor load rate(%)
    • Easy to check the motor load condition
    Selectable either the inverse time or definite time characteristics

    Applicable to inverter control circuit
    • LS DMPR has high performance under the harmonic noise and can be used in the Inverter control circuit (20~200Hz)
    Elegant design
    • High class product image by the elegant design
+ Characteristics
Protect function
Protect function
Over current Depend on setting time Selectable the inverse/definite
Phase loss Within 3seconds Over 70% of the rate of unbalance
Phase unbalance Within 5seconds Over 50% of the rate of unbalance
Phase reverse Within 0.1seconds Function enable
Stall Within 5seconds Over 180% of the setting current
Lock Within 0.5seconds Setting 200~900% of rated current
Under current Within 3seconds Setting 30~70% of rated current
Ground fault Note) Selectable 0.05~1.0seconds Grounded current setting by dip s/w (100~2500mA)

Note) Lock protection is operated after setting D-time in case of definite time type

Function selection
Function selection
FUNC Sel Description
1. CHA Inv/dEF Operating characteristics setting(Inverse/definite time type)
2. dEF 0~30(S) Setting the operating time(In definite type)
3. r.P oFF/on Phase reverse enable
4. Und oFF/30~70(%) Under current enable and setting
5. g-F oFF/0.05~1.0(S) Ground fault enable and setting
6. Stl oFF/on Stall enable
7. Loc oFF/200~900(%) Lock enable and setting
8. Ct 1~120 CT ratio setting
9. P.F on/oFF Phase fault enable
A. gFd oFF/on Setting delay of ground fault
b. StA 0~120 Operating time setting by month
c. StH 10~730 Operating time setting by hour
d. tAH A000,000.0 Displaying total operating time